ASTM's cement and concrete standards are instrumental in the evaluation and testing of concrete, cement, and aggregates. Concrete can have different properties depending upon the mixture that is used in creating it, which contains cement, chemical admixtures, and aggregates. These ingredients are mixed with water to create concrete which is used as a primary construction material in buildings. These cement and concrete standards allow laboratories all over the world to test and evaluate concrete mixtures to ensure their strength and safety. These standards help to identify the various properties of concrete including strength, elasticity, hardness, and workability.

Cement Standards and Concrete Standards

ASTM's cement and concrete standards are instrumental in the evaluation and testing of concrete, cement, and aggregates. Concrete can have different properties depending upon the mixture that is used in creating it, which contains cement, chemical admixtures, and aggregates. These ingredients are mixed with water to create concrete which is used as a primary construction material in buildings. These cement and concrete standards allow laboratories all over the world to test and evaluate concrete mixtures to ensure their strength and safety. These standards help to identify the various properties of concrete including strength, elasticity, hardness, and workability.

Jump to:

Abrasion Testing

C779/C779M-19 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

C1138M-19 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

C418-20 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

C944/C944M-19 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

C1803/C1803M-23 Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser

Additions

C226-22 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C688-22 Standard Specification for Functional Additions for Use in Hydraulic Cements

C465-23 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

C1565-23 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements

Aggregate Reactions in Concrete

C441/C441M-17 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C586-19 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C227-10 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method) (Withdrawn 2018)

C1567-23 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1260-23 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1778-23 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete

C1293/C1293M-23a Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1105-23a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

Aggregates

C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C131/C131M-20 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C566-19 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C40/C40M-20 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

C136/C136M-19 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

C702/C702M-18 Standard Practice for Reducing Samples of Aggregate to Testing Size

C638-20 Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

C637-20 Standard Specification for Aggregates for Radiation-Shielding Concrete

C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011)

C1777-20 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

C70-20 Standard Test Method for Surface Moisture in Fine Aggregate

C128-22 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

C87/C87M-23 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

C33/C33M-23 Standard Specification for Concrete Aggregates

C29/C29M-23 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

C142/C142M-17(2023) Standard Test Method for Clay Lumps and Friable Particles in Aggregates

C117-23 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

C1797-23a Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete

C123/C123M-23 Standard Test Method for Lightweight Particles in Aggregate

C88/C88M-24 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

C127-24 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

Air Entrainment

C185-20 Standard Test Method for Air Content of Hydraulic Cement Mortar

Application of Exterior Insulating and Finish Systems and Related Products

C1397-13(2019) Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

C1516-05(2023) Standard Practice for Application of Direct-Applied Exterior Finish Systems

C1535-05(2023) Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

Chemical Admixtures

C869/C869M-11(2016) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C1582/C1582M-11(2017)e1 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C260/C260M-10a(2016) Standard Specification for Air-Entraining Admixtures for Concrete

C233/C233M-18 Standard Test Method for Air-Entraining Admixtures for Concrete

C1017/C1017M-13e1 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022)

C796/C796M-19 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C403/C403M-23 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C1882/C1882M-24 Standard Specification for Anti-washout Admixtures for Concrete

C494/C494M-24 Standard Specification for Chemical Admixtures for Concrete

C979/C979M-24 Standard Specification for Pigments for Integrally Colored Concrete

C1622/C1622M-24 Standard Specification for Cold-Weather Admixture Systems

Chemical Tests

C1318-15a(2020) Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

C1271-99(2020) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1301-22 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C25-24 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C400-19(2024)e2 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

Compositional Analysis

C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement

C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

C1356-07(2020) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

C1875-18(2024) Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)

C114-24 Standard Test Methods for Chemical Analysis of Hydraulic Cement

Concrete's Resistance to Fluid Penetration

C1757-13 Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)

C1792-14 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)

C1585-20 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

C1543-10a Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding (Withdrawn 2019)

C1760-12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021)

C642-21 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

C1202-22e1 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration

C1556-22 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

C1876-24 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete

Coordination of Standards

C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements

C490/C490M-21 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

C511-21 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C778-21 Standard Specification for Standard Sand

C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

C183/C183M-23 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

Editorial and Terminology

C51-23 Standard Terminology Relating to Lime and Limestone (as Used by the Industry)

Evaluation of Data (Joint C09 and C01)

C1067-20 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

C1451-18 Standard Practice for Determining Variability of Concrete-Making Materials From a Single Source

C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

C670-24a Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

Evaluation of Laboratories

C1077-24 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

Fiber-Reinforced Concrete

C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)

C1579-21 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

C1399/C1399M-10(2015) Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024)

C995-01 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (Withdrawn 2008)

C1550-20 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

C1812/C1812M-22 Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests

C1116/C1116M-23 Standard Specification for Fiber-Reinforced Concrete

C1609/C1609M-24 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

Fineness

C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and 75-µm (No. 200) Sieves (Withdrawn 2002)

C115/C115M-10e1 Standard Test Method for Fineness of Portland Cement by the Turbidimeter (Withdrawn 2018)

C1891-20 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)

C188-17(2023) Standard Test Method for Density of Hydraulic Cement

C204-24 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

C786/C786M-24 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

C430-24 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

Heat of Hydration

C186-17 Standard Test Method for Heat of Hydration of Hydraulic Cement (Withdrawn 2019)

C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

Hydraulic Cement Grouts

C942/C942M-21 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C1181/C1181M-17 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C940-22 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

C939/C939M-22 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C937-23 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

C941-23 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

C953-24 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C943-24 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

C1339/C1339M-24 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

C1741-24 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

C938-24 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

Hydraulic Cements for General Concrete Construction

C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement

C10/C10M-24 Standard Specification for Natural Cement

C150/C150M-24 Standard Specification for Portland Cement

C595/C595M-24 Standard Specification for Blended Hydraulic Cements

Lightweight Aggregates and Concrete

C567/C567M-19 Standard Test Method for Determining Density of Structural Lightweight Concrete

C513/C513M-11(2019) Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

C495/C495M-12(2019) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

C330/C330M-23 Standard Specification for Lightweight Aggregates for Structural Concrete

C331/C331M-23 Standard Specification for Lightweight Aggregates for Concrete Masonry Units

C332-23 Standard Specification for Lightweight Aggregates for Insulating Concrete

C641-23 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

C1761/C1761M-23 Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

Masonry Cement

C1329/C1329M-23 Standard Specification for Mortar Cement

C91/C91M-23 Standard Specification for Masonry Cement

C1328/C1328M-23 Standard Specification for Plastic (Stucco) Cement

Materials Applied to New Concrete Surfaces

C1151-91 Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 2000)

C156-20 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

C309-19 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

C1315-19 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

C171-20 Standard Specification for Sheet Materials for Curing Concrete

Miscellaneous Tests

C1152/C1152M-20 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

C1524-20 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

C1580-20 Standard Test Method for Water-Soluble Sulfate in Soil

C1218/C1218M-20 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

C1084-19 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

Nondestructive and In-Place Testing

C1150-96 Standard Test Method for the Break-Off Number of Concrete (Withdrawn 2002)

C805/C805M-18 Standard Test Method for Rebound Number of Hardened Concrete

C215-19 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens

C1074-19e1 Standard Practice for Estimating Concrete Strength by the Maturity Method

C597-22 Standard Test Method for Ultrasonic Pulse Velocity Through Concrete

C803/C803M-23 Standard Test Method for Penetration Resistance of Hardened Concrete

C900-23 Standard Test Method for Pullout Strength of Hardened Concrete

C1383-23 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

C1740-24 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

Organic Materials for Bonding

C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear (Withdrawn 2008)

C881/C881M-20a Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C1059/C1059M-21 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

C1857/C1857M-19 Standard Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar

C1583/C1583M-20 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

C1404/C1404M-98(2003) Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension (Withdrawn 2010)

C884/C884M-23 Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C882/C882M-23 Standard Test Method for Bond Strength of Bonding Systems Used With Concrete By Slant Shear

Packaged Dry Combined Materials

C928/C928M-20a Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

C1107/C1107M-20 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C387/C387M-23 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

C1708/C1708M-23 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

C1933/C1933M-24 Standard Test Methods for Floor Patching and Skim Coating Compounds Containing Hydraulic Cements

Performance of Cementitious Materials and Admixture Combinations

C1827-20 Standard Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture

C1753/C1753M-21a Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements

C1679-22 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

C1810/C1810M-23 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures

Pervious Concrete

C1747/C1747M-13 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022)

C1688/C1688M-14a Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)

C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete (Withdrawn 2021)

C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete

Petrography

C295/C295M-19 Standard Guide for Petrographic Examination of Aggregates for Concrete

C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete

C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

C823/C823M-24 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

C294-24 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

C457/C457M-24 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

Physical Tests

C50/C50M-13(2019) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C110-24 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Ready-Mixed Concrete

C1602/C1602M-22 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1603-23 Standard Test Method for Measurement of Solids in Water

C1798/C1798M-24 Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete

C94/C94M-24b Standard Specification for Ready-Mixed Concrete

C685/C685M-24 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

Resistance to the Environment

C671-94 Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (Withdrawn 2003)

C682-94 Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures (Withdrawn 2003)

C666/C666M-15 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)

C1646/C1646M-16 Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

C672/C672M-12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)

Roller-Compacted Concrete

C1176/C1176M-20 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

C1800/C1800M-16 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor

C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

C1435/C1435M-20 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

C1245/C1245M-12 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) (Withdrawn 2019)

C1849/C1849M-23 Standard Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete

C1040/C1040M-24 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

Self-Consolidating Concrete

C1610/C1610M-21 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

C1611/C1611M-21 Standard Test Method for Slump Flow of Self-Consolidating Concrete

C1712-20 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

C1621/C1621M-17(2023) Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

C1758/C1758M-23 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

Shotcrete

C1117-89(1994) Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance (Withdrawn 2003)

C1102-94 Standard Test Method for Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles (Withdrawn 2002)

C1141/C1141M-15 Standard Specification for Admixtures for Shotcrete (Withdrawn 2024)

C1385/C1385M-10(2017) Standard Practice for Sampling Materials for Shotcrete

C1140/C1140M-11(2019) Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

C1604/C1604M-05(2019) Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

C1398-07 Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)

C1436-13 Standard Specification for Materials for Shotcrete (Withdrawn 2022)

C1480/C1480M-07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application (Withdrawn 2021)

Slag Cement

C1073-18(2023) Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

C989/C989M-24 Standard Specification for Slag Cement for Use in Concrete and Mortars

Special Cements

C845/C845M-18 Standard Specification for Expansive Hydraulic Cement

C1600/C1600M-23 Standard Specification for Rapid Hardening Hydraulic Cement

C806-23 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

Specifications and Guidelines

C1707-18 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

C911-19 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

C1529-19 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

C593-19 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C706-19 Standard Specification for Limestone for Animal Feed Use

C1097-19 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

C141/C141M-14(2022) Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

C206-14(2022) Standard Specification for Finishing Hydrated Lime

C1164-22 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

C1489-15(2022) Standard Specification for Lime Putty for Structural Purposes

C737-22 Standard Specification for Limestone for Dusting of Coal Mines

C821-22 Standard Specification for Lime for Use with Pozzolans

C602-23 Standard Specification for Agricultural Liming Materials

C5-24 Standard Specification for Quicklime for Structural Purposes

C977-18(2024) Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

D6249-19(2024) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

C207-24 Standard Specification for Hydrated Lime for Masonry Purposes

Specifications and Test Methods for Accessories and Related Products

C1788-20 Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications

C645-18 Standard Specification for Nonstructural Steel Framing Members

C1047-19 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

C1513-18 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

C955-18e1 Standard Specification for Cold-Formed Steel Structural Framing Members

C847-18 Standard Specification for Metal Lath

C1032-18 Standard Specification for Woven Wire Plaster Base

C35-01(2019) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

C514-04(2020) Standard Specification for Nails for the Application of Gypsum Board

C897-15(2020) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

C631-09(2020) Standard Specification for Bonding Compounds for Interior Gypsum Plastering

C474-15(2020) Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

C1764-20 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications

C475/C475M-17(2022) Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

C1002-22 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C954-22 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

C1921/C1921M-22 Standard Test Method for Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems

C1860-23ce1 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension

C1861-23a Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster

C933-23 Standard Specification for Welded Wire Lath

C1925/C1925M-24 Standard Test Method for Strength Properties of Direct Hung, Suspended T-bar Type Ceiling System Components Intended to Receive Gypsum Panel Products

C932-06(2024) Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

Specifications and Test Methods for Gypsum Products

C22/C22M-00(2021) Standard Specification for Gypsum

C473-19 Standard Test Methods for Physical Testing of Gypsum Panel Products

C1396/C1396M-17 Standard Specification for Gypsum Board

C318/C318M-13(2018) Standard Specification for Gypsum Formboard

C587-04(2018) Standard Specification for Gypsum Veneer Plaster

C1766-15(2019) Standard Specification for Factory-Laminated Gypsum Panel Products

C1264-19 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

C1881-20 Standard Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products

C472-20 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete

C28/C28M-10(2020) Standard Specification for Gypsum Plasters

C61/C61M-00(2020) Standard Specification for Gypsum Keene's Cement

C1355/C1355M-96(2020) Standard Specification for Glass Fiber Reinforced Gypsum Composites

C1658/C1658M-19e1 Standard Specification for Glass Mat Gypsum Panels

C442/C442M-04e1 Standard Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board (Withdrawn 2005)

C1597M-04(2009)e1 Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013)

C630/C630M-03e1 Standard Specification for Water-Resistant Gypsum Backing Board (Withdrawn 2005)

C588/C588M-03e1 Standard Specification for Gypsum Base for Veneer Plasters (Withdrawn 2005)

C960/C960M-04 Standard Specification for Predecorated Gypsum Board (Withdrawn 2005)

C79/C79M-04a Standard Specification for Gypsum Sheathing Board (Withdrawn 2005)

C931/C931M-04e1 Standard Specification for Exterior Gypsum Soffit Board (Withdrawn 2005)

C1395/C1395M-04e1 Specification for Gypsum Ceiling Board (Withdrawn 2005)

C37/C37M-01e1 Standard Specification for Gypsum Lath (Withdrawn 2005)

C36/C36M-03e1 Standard Specification for Gypsum Wallboard (Withdrawn 2005)

C59/C59M-00(2020) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

C1381/C1381M-23 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

C1629/C1629M-23 Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

C1177/C1177M-24 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

C471M-24 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C317/C317M-24 Standard Specification for Gypsum Concrete

C1789-24 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels

C1795-17(2024) Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels

C1178/C1178M-24 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

C1278/C1278M-24 Standard Specification for Fiber-Reinforced Gypsum Panel

Specifications for the Application of Gypsum and Other Products in Assemblies

C1467/C1467M-00(2021) Standard Specification for Installation of Molded Glass Fiber Reinforced Gypsum Parts

C842-05(2021) Standard Specification for Application of Interior Gypsum Plaster

C844-15(2021) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

C1546-19 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

C754-20 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

C1007-20 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

C843-23 Standard Specification for Application of Gypsum Veneer Plaster

C841-23 Standard Specification for Installation of Interior Lathing and Furring

C1063-23 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

C1787-23 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

C1280-18(2023) Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

C840-23 Standard Specification for Application and Finishing of Gypsum Board

C926-24 Standard Specification for Application of Portland Cement-Based Plaster

C1858/C1858M-24 Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions

C956-24 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

Strength

C348-21 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C917/C917M-18 Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength

C349-18 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

C109/C109M-23 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)

Sulfate Content

C265-08 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar (Withdrawn 2017)

C563-20 Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement

C1038/C1038M-24 Standard Test Method for Expansion of Hydraulic Cementitious Material Mortar Bars Stored in Water

Sulfate Resistance

C452-21 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

C1012/C1012M-24 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

Supplementary Cementitious Materials

C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements

C1697-21 Standard Specification for Blended Supplementary Cementitious Materials

C1240-20 Standard Specification for Silica Fume Used in Cementitious Mixtures

D5370-14 Standard Specification for Pozzolanic Blended Materials in Construction Applications (Withdrawn 2020)

C1866/C1866M-22 Standard Specification for Ground-Glass Pozzolan for Use in Concrete

C1709-22 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

C618-23e1 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C311/C311M-24 Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete

Terminology

C125-21a Standard Terminology Relating to Concrete and Concrete Aggregates

Terminology and Editorial

C11-24 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

Testing for Strength

C1768/C1768M-12(2017) Standard Practice for Accelerated Curing of Concrete Cylinders

C174/C174M-17 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

C1856/C1856M-17 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete

C42/C42M-20 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

C192/C192M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

C1542/C1542M-19 Standard Test Method for Measuring Length of Concrete Cores

C496/C496M-17 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

C918/C918M-20 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

C684-99(2003) Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012)

C801-98 Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads (Withdrawn 2004)

C293/C293M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C469/C469M-22 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

C470/C470M-23 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

C617/C617M-23 Standard Practice for Capping Cylindrical Concrete Specimens

C873/C873M-23 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

C1231/C1231M-23 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens

C512/C512M-24 Standard Test Method for Creep of Concrete in Compression

C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field

C39/C39M-24 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Testing Fresh Concrete

C172/C172M-17 Standard Practice for Sampling Freshly Mixed Concrete

C143/C143M-20 Standard Test Method for Slump of Hydraulic-Cement Concrete

C1890-19 Standard Test Method for K-slump of Freshly Mixed Concrete

C1362-09 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete (Withdrawn 2014)

C232/C232M-21 Standard Test Method for Bleeding of Concrete

C1079-87(1992)e1 Test Methods for Determining the Water Content of Freshly Mixed Concrete (Withdrawn 1998)

C1078-87(1992)e1 Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998)

C1064/C1064M-23 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

C231/C231M-24 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C173/C173M-24a Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

C138/C138M-24a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

Time of Set

C191-21 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

C266-21 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

C451-21 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C807-21 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

C359-21 Standard Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)

Volume Change

C1698-19 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

C878/C878M-22 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

C827/C827M-23 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

C1090/C1090M-23 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

C1581/C1581M-24 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

C157/C157M-24 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

C341/C341M-24 Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

Workability

C243-95 Standard Test Method for Bleeding of Cement Pastes and Mortars (Withdrawn 2001)

C1437-20 Standard Test Method for Flow of Hydraulic Cement Mortar

C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

C1738/C1738M-19 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

C305-20 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

C1506-17 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer

C230/C230M-23 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

C1922-23 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters by Way of Water Loss

C187-23 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste